Hong-Zhong Huang - IEEE Xplore Author Profile

Showing 1-6 of 6 results

Filter Results

Show

Results

We demonstrated the monolithic 3D (M3D) integration of InGaAs photodetectors (PDs) on silicon-on-insulator metal-oxide-semiconductor field-effect transistors (SOI-MOSFETs) by the sequential process of InGaAs PDs on pre-fabricated SOI-MOSFETs. InGaAs PDs and SOI MOSFETs showed their original performances after integration and sequential process thanks to the low-temperature process. In addition, th...Show More
III-V materials can be a very good channel candidate for monolithic 3D (M3D) integration due to the potential of high-performance and lower process temperature as compared with Si, since a low process temperature is crucial to avoid degradation of bottom devices. For III-V M3D integration, material transfer techniques are important, and such processes should be enabled by low process costs on a la...Show More
Self-heating has emerged as an important performance/reliability challenge for modern MOSFETs. The challenge is further acerbated for III-V transistors, especially when integrated monolithically in a 3-D platform for applications in ultrafast logic, imagers, etc. A key challenge is the difficulty of heat-dissipation through the ultra-thin channels needed to ensure electrostatic integrity of scaled...Show More
Monolithic 3D (M3D) integration with III-V compound semiconductor (e.g., InGaAs) offers many advantages of reduced power consumption, footprint and enhanced performance and various functionality such as RF, imager, and Micro LED [1] [2] [3]. These advantages of M3D are often counterbalanced by persistent challenge of self-heating during device operation. A M3D system stacks multiple ultra-thin cha...Show More
In this paper, approaches to obtain the sub-kT/q non-hysteretic operation mode in negative capacitance (NC) field-effect-transistors for a wide band of applied gate voltages, using capacitance matching, were systematically investigated using TCAD simulation. Unlike certain previous studies, in which the desired operation conditions were received for specific structures and materials, this study pr...Show More
Monolithic 3-D integration has emerged as a promising technological solution for traditional transistor scaling limitations and interconnection bottleneck. The challenge we must overcome is a processing temperature limit for top side devices in order to ensure proper performance of bottom side devices. To solve this problem, we developed a low temperature III–V and Ge layer stacking process using ...Show More