Space-Charge Accumulation and Its Impact on High-Voltage Power Module Partial Discharge Under DC and PWM Waves: Testing and Modeling

Emerging applications of compact high-voltage SiC modules pose strong challenges in the module package insulation design. Such SiC module insulations are subjected to both high-voltage dc and pulsewidth modulation (PWM) excitations between different terminals during different switching intervals. High
dV/dt
strongly interferes with partial discharge (PD) testing as it is hard to distinguish PD pulses and PWM excitation-induced interferences. This article covers both the testing and modeling of PD phenomena in the high-voltage power modules. A high
dV/dt
PD testing platform is proposed, which involves a super-high-frequency (SHF) (SHF >3 GHz) down-mixing PD detection receiver and a high-voltage scalable square wave generator. The proposed method captures SHF PD signatures and determines PD inception voltage (PDIV) for packaging insulation. Using this platform, this article provides a group of PDIV comparisons of packaging insulation under dc and PWM waveforms and discloses discrepancies in these PDIV results with respect to their excitations. Based on these PD testing results, the article further provides a model using the space-charge accumulation to explain the PD difference under dc and PWM waveforms. Both simulation and sample testing results are included in this article to support this hypothesis. With this new model, the article includes an updated insulation design procedure for the high-voltage power modules.