Design Procedure for Bandpass Filters Based on Integrated Coaxial and Rectangular Waveguide Resonators | IEEE Journals & Magazine | IEEE Xplore

Design Procedure for Bandpass Filters Based on Integrated Coaxial and Rectangular Waveguide Resonators


Abstract:

In this article, we present a novel bandpass filter based on dual-mode resonators. The dual-mode operation is based on integrated coaxial and rectangular waveguide caviti...Show More

Abstract:

In this article, we present a novel bandpass filter based on dual-mode resonators. The dual-mode operation is based on integrated coaxial and rectangular waveguide cavities. Furthermore, we also discuss a systematic design procedure for the selection of the dimensions of the various constituent elements of the filter, which is based on the well-known aggressive space mapping technique. The design of a five-pole bandpass filter operating in the X-band is discussed in detail, including the measured data. The comparison between simulations and measurement shows very good agreement, thereby fully validating both the new filter structure and the design procedure.
Published in: IEEE Transactions on Microwave Theory and Techniques ( Volume: 68, Issue: 10, October 2020)
Page(s): 4390 - 4404
Date of Publication: 04 August 2020

ISSN Information:

Funding Agency:


References

References is not available for this document.