Abstract:
This article proposes a novel hybrid-excitation flux-switching (HEFS) machine with axial partitioned stator (APS) arrangement, which can achieve the independent accommoda...Show MoreMetadata
Abstract:
This article proposes a novel hybrid-excitation flux-switching (HEFS) machine with axial partitioned stator (APS) arrangement, which can achieve the independent accommodation of armature winding and field-excitation winding, thus enhancing the field-excitation capability and improving the winding heat dissipation. More importantly, a particular parallel-magnetic-circuit hybrid-excitation pattern consisting of the axial and radial magnetic paths is innovatively developed in the HEFS machine, which is an effective solution for improving the flux-regulation ability. Consequently, the PMC-based flux-regulation principle is comprehensively illustrated. Moreover, by investigating the flux-regulation characteristics of three structural feasible APS-HEFS topologies, the bilateral complementary structure is finally determined as the preferred option. By using the multiobjective optimization method and the three-dimensional finite-element analysis (FEA), the dimensional parameter optimization design of the proposed machine is conducted, and the performance comparison with conventional HEFS counterparts is also carried out to prove the flux-regulation superiority of the proposed design. Finally, a prototype is fabricated for experimental testing, and the measured results are in good agreement with the FEA, which verifies the validity of the proposed APS-HEFS topology and its theoretical flux-regulation principle analysis.
Published in: IEEE Transactions on Industrial Electronics ( Volume: 68, Issue: 8, August 2021)
Funding Agency:
College of Electrical Engineering, Qingdao University, Qingdao, China
Xianglin Li (Member, IEEE) was born in Shandong, China. He received the B.S. and M.S. degrees from the College of Information and Control Engineering, China University of Petroleum, Qingdao, China, in 2007 and 2010, respectively, and the Ph.D. degree in electrical engineering from the School of Electrical Engineering, Southeast University, Nanjing, China, in 2015.
He was a Visiting Student with the Wisconsin Electric Machi...Show More
Xianglin Li (Member, IEEE) was born in Shandong, China. He received the B.S. and M.S. degrees from the College of Information and Control Engineering, China University of Petroleum, Qingdao, China, in 2007 and 2010, respectively, and the Ph.D. degree in electrical engineering from the School of Electrical Engineering, Southeast University, Nanjing, China, in 2015.
He was a Visiting Student with the Wisconsin Electric Machi...View more
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore
Fawen Shen was born in Shandong, China, in 1994. He received the B.S. and M.S. degrees in electrical engineering from the China University of Petroleum (East China), Shandong, China, in 2016 and 2019, respectively. He is currently working toward the Ph.D. degree at School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore.
His research interests include the design and analysis of permanen...Show More
Fawen Shen was born in Shandong, China, in 1994. He received the B.S. and M.S. degrees in electrical engineering from the China University of Petroleum (East China), Shandong, China, in 2016 and 2019, respectively. He is currently working toward the Ph.D. degree at School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore.
His research interests include the design and analysis of permanen...View more
College of New Energy, China University of Petroleum, Qingdao, China
Shiyang Yu was born in Shandong, China, in 1994. He received the B.S. degree in automation from the Qingdao University of Science and Technology, Shandong, China, in 2017, and is currently working toward the M.S. degree in electrical engineering at the China University of Petroleum (East China), Shandong.
His research interests include the design and analysis of electrical machines and high-temperature superconducting mach...Show More
Shiyang Yu was born in Shandong, China, in 1994. He received the B.S. degree in automation from the Qingdao University of Science and Technology, Shandong, China, in 2017, and is currently working toward the M.S. degree in electrical engineering at the China University of Petroleum (East China), Shandong.
His research interests include the design and analysis of electrical machines and high-temperature superconducting mach...View more
College of New Energy, China University of Petroleum, Qingdao, China
Zhiwei Xue was born in Shandong, China, in 1995. He received the B.S. degree in electrical engineering and automation from the Shandong University of Technology, Shandong, China, in 2018. He is currently working toward the M.S. degree in electrical engineering at China University of Petroleum (East China), Shandong.
His research interest focuses on the permanent magnet machine drive control.
Zhiwei Xue was born in Shandong, China, in 1995. He received the B.S. degree in electrical engineering and automation from the Shandong University of Technology, Shandong, China, in 2018. He is currently working toward the M.S. degree in electrical engineering at China University of Petroleum (East China), Shandong.
His research interest focuses on the permanent magnet machine drive control.View more
Contents College of Electrical Engineering, Qingdao University, Qingdao, China
Xianglin Li (Member, IEEE) was born in Shandong, China. He received the B.S. and M.S. degrees from the College of Information and Control Engineering, China University of Petroleum, Qingdao, China, in 2007 and 2010, respectively, and the Ph.D. degree in electrical engineering from the School of Electrical Engineering, Southeast University, Nanjing, China, in 2015.
He was a Visiting Student with the Wisconsin Electric Machine and Power Electronics Consortium, University of Wisconsin-Madison, Madison, WI, USA, from September 2012 to 2013, and a Research Assistant with the Department of Electrical and Electronic Engineering, University of Hong Kong, Hong Kong, from July 2014 to January 2015. Between 2015 and 2019, he was an Associate Professor with China University of Petroleum, Shandong, China. Since 2020, he has been a Professor with the College of Electrical Engineering, Qingdao University, Qingdao, China. His research interests mainly include magnetic gear, field modulation theory, design and drive control of electric machines, and high-temperature superconducting machines.
Xianglin Li (Member, IEEE) was born in Shandong, China. He received the B.S. and M.S. degrees from the College of Information and Control Engineering, China University of Petroleum, Qingdao, China, in 2007 and 2010, respectively, and the Ph.D. degree in electrical engineering from the School of Electrical Engineering, Southeast University, Nanjing, China, in 2015.
He was a Visiting Student with the Wisconsin Electric Machine and Power Electronics Consortium, University of Wisconsin-Madison, Madison, WI, USA, from September 2012 to 2013, and a Research Assistant with the Department of Electrical and Electronic Engineering, University of Hong Kong, Hong Kong, from July 2014 to January 2015. Between 2015 and 2019, he was an Associate Professor with China University of Petroleum, Shandong, China. Since 2020, he has been a Professor with the College of Electrical Engineering, Qingdao University, Qingdao, China. His research interests mainly include magnetic gear, field modulation theory, design and drive control of electric machines, and high-temperature superconducting machines.View more
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore
Fawen Shen was born in Shandong, China, in 1994. He received the B.S. and M.S. degrees in electrical engineering from the China University of Petroleum (East China), Shandong, China, in 2016 and 2019, respectively. He is currently working toward the Ph.D. degree at School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore.
His research interests include the design and analysis of permanent-magnet electrical machines and integrated-power-electronics motor design.
Fawen Shen was born in Shandong, China, in 1994. He received the B.S. and M.S. degrees in electrical engineering from the China University of Petroleum (East China), Shandong, China, in 2016 and 2019, respectively. He is currently working toward the Ph.D. degree at School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore.
His research interests include the design and analysis of permanent-magnet electrical machines and integrated-power-electronics motor design.View more
College of New Energy, China University of Petroleum, Qingdao, China
Shiyang Yu was born in Shandong, China, in 1994. He received the B.S. degree in automation from the Qingdao University of Science and Technology, Shandong, China, in 2017, and is currently working toward the M.S. degree in electrical engineering at the China University of Petroleum (East China), Shandong.
His research interests include the design and analysis of electrical machines and high-temperature superconducting machine design.
Shiyang Yu was born in Shandong, China, in 1994. He received the B.S. degree in automation from the Qingdao University of Science and Technology, Shandong, China, in 2017, and is currently working toward the M.S. degree in electrical engineering at the China University of Petroleum (East China), Shandong.
His research interests include the design and analysis of electrical machines and high-temperature superconducting machine design.View more
College of New Energy, China University of Petroleum, Qingdao, China
Zhiwei Xue was born in Shandong, China, in 1995. He received the B.S. degree in electrical engineering and automation from the Shandong University of Technology, Shandong, China, in 2018. He is currently working toward the M.S. degree in electrical engineering at China University of Petroleum (East China), Shandong.
His research interest focuses on the permanent magnet machine drive control.
Zhiwei Xue was born in Shandong, China, in 1995. He received the B.S. degree in electrical engineering and automation from the Shandong University of Technology, Shandong, China, in 2018. He is currently working toward the M.S. degree in electrical engineering at China University of Petroleum (East China), Shandong.
His research interest focuses on the permanent magnet machine drive control.View more
