Analyses and Solutions for the Buckling of Thin and Flexible Electrostatic Inchworm Climbing Robots

Planar and flexible climbing robots suffer from buckling while climbing on a vertical surface. This paper analyzes two different modes: one-end free buckling and two-ends fixed buckling. As an example for buckling analyses, the paper focuses on an electrostatic climbing robot that features thin body. As the body of the robot has only 2.5 mm of thickness, it is more prone to buckling than any other flexible robots, making it the best example for the buckling problem. Based on the analyses, the paper proposes a buckling-free control strategy for the electrostatic robots. The proposed strategy guarantees the force balance between adhesive force and weight force, as well as the elastic stability of the robot. To implement the strategy, the paper investigates the available region of the proper forces and optimal parameters on the prototype robot. A prototype of climbing robot was developed to verify the analyses and solutions, weighing merely 29 g (excluding battery and control circuits). It successfully climbed up a vertical wall without buckling, carrying the payload of 0.4 N.