Abstract:
The performance, electrical and mechanical interchangeability, and the safety of the equipment are covered. The proper selection of such equipment is established as a bas...Show MoreScope:This standard describes the electrical, dimensional, and mechanical characteristics and takes into consideration the safety features of three-phase, 60 Hz, low-voltage (6...Show More
Purpose:This standard is intended for use as a basis for establishing the performance, electrical and mechanical interchangeability, and safety of the equipment covered and to as...Show More
Metadata
Abstract:
The performance, electrical and mechanical interchangeability, and the safety of the equipment are covered. The proper selection of such equipment is established as a basis for use in this standard. Certain electrical, dimensional, and mechanical characteristics are described; and certain safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors are taken into consideration. This equipment is used for automatically connecting and disconnecting a network transformer from a secondary spot or grid network.
Scope:
This standard describes the electrical, dimensional, and mechanical characteristics and takes into consideration the safety features of three-phase, 60 Hz, low-voltage (600 V and below) network protectors. They are used for automatically connecting and disconnecting a network transformer from a secondary spot or grid network.
Purpose:
This standard is intended for use as a basis for establishing the performance, electrical and mechanical interchangeability, and safety of the equipment covered and to assist in the proper selection of such equipment.
Date of Publication: 13 June 2014
Electronic ISBN:978-0-7381-9072-3
Persistent Link: https://ieeexplore.ieee.org/servlet/opac?punumber=6832423
References is not available for this document.
Select All
1.
ANSI C84.1, American National Standard Voltage Ratings (60 Hz) for Electric Power Systems and Equipment.
2.
ANSI C57.12.57–1987 (withdrawn), American National Standard for Transformers-Ventilated Dry- Type Network Transformers 2500 kVA and Below, Three-Phase with High-Voltage 34 500 Volts and Below, Low-Voltage 216Y/I25 and 480Y/277 Volts-Requirements.
3.
ASME B1.1, Unified Inch Screw Threads (UN and UNR Thread Forms).
4.
ASME B1.20.1, American National Standard for Pipe Threads, General Purpose (Inch).
5.
ASTM D229, Standard Test Methods for Rigid Sheet and Plate Materials Used in Electrical Insulation.
6.
ASTM D2303, Standard Test Methods for Liquid-contaminant, Inclined-plane Tracking and Erosion of Insulating Materials.
7.
IEEE Standards Dictionary Online.
8.
IEEE Std 1™, IEEE Recommended Practice-General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation.
9.
IEEE Std C37.09™, IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis.
10.
IEEE Std C37.I08™, IEEE Guide for the Protection of Network Transformers.
11.
IEEE Std C57.12.00™-2010, IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers.
12.
IEEE Std C57.12.70™, IEEE Standard Terminal Markings and Connections for Distribution and Power Transformers.
13.
IEEE Std C57.12.80™, IEEE Standard Terminology for Power and Distribution Transformers.
14.
IEEE Std C57.9I™, IEEE Guide IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators.
15.
UL 94, UL Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
16.
UL 746A, UL Standard for Safety Polymeric Materials—Short Term Property Evaluations.
