Loading [MathJax]/extensions/MathMenu.js
Simple removal technology using ozone solution for chemically-stable polymer used for MEMS | IEEE Conference Publication | IEEE Xplore

Simple removal technology using ozone solution for chemically-stable polymer used for MEMS


Abstract:

This paper reports simple removal technology using ozone solution for chemically-stable polymers such as SU-8, BCB, polyimide and carbonized resist. Conventionally, these...Show More

Abstract:

This paper reports simple removal technology using ozone solution for chemically-stable polymers such as SU-8, BCB, polyimide and carbonized resist. Conventionally, these polymers are difficult to remove completely by O2 plasma and organic solutions because of their chemical stability and inorganic additives. In this study, these polymers were etched using acetic acid and water solution of ozone. Residue analysis after polymer etching was performed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The analysis demonstrated that the ozone solution could etch and remove these polymers without residue. This strong etching effect might be attributed to strong organic decomposition ability of ozone and rinse effect of inorganic materials in wet process.
Date of Conference: 23-27 January 2011
Date Added to IEEE Xplore: 17 March 2011
ISBN Information:
Print ISSN: 1084-6999
Conference Location: Cancun, Mexico

Contact IEEE to Subscribe

References

References is not available for this document.