Abstract:
With the standstill frequency-response (SSFR) test, accurate electrical-machine models can be identified. However, it can be a time-consuming method, particularly in case...Show MoreMetadata
Abstract:
With the standstill frequency-response (SSFR) test, accurate electrical-machine models can be identified. However, it can be a time-consuming method, particularly in case the machine has to be identified at low frequencies. To shorten the required time for identification, in this paper, the response on a broadband signal is measured, resulting in a multisine SSFR test. To generate the broadband signal, a high-power linear amplifier can be applied as a waveform generator. As this signal generator is not commonly available in the field, the application of a voltage-source inverter (VSI) is discussed. The multisine SSFR test with a VSI allows swift evaluation of the influence of frequency, saturation, and cross saturation on the q-and d-axis parameters with a signal generator that is often already available to control the machine. Extensive measurements are performed on several permanent-magnet synchronous machines and the method can be extended to synchronous machines with rotor-field winding. By applying a switching converter instead of a linear amplifier, it can be expected that the identification results are affected by the switching actions. Therefore, multisine SSFR tests with either a VSI or a high-power linear amplifier as well as conventional tests as described in the IEEE standard are performed, and the results are compared.
Published in: IEEE Transactions on Industrial Electronics ( Volume: 57, Issue: 1, January 2010)
Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Tine L. Vandoorn (S'08) was born in Torhout, Belgium, in 1985. She received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2008, where she has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2008.
In 2009, she was awarded a Ph.D. Fellowship from the Research Foundation–Flanders (FWO). Her present research interests include parameter identifi...Show More
Tine L. Vandoorn (S'08) was born in Torhout, Belgium, in 1985. She received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2008, where she has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2008.
In 2009, she was awarded a Ph.D. Fellowship from the Research Foundation–Flanders (FWO). Her present research interests include parameter identifi...View more
Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Frederik M. De Belie (M'05) was born in Belgium in 1979. He received the Master degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2002, where he is currently working toward the Ph.D. degree.
His present research interests include modeling theory and control-system theory applied to electrical drives and, in particular, sensorless control of permanent-magnet synchronous machines.
Frederik M. De Belie (M'05) was born in Belgium in 1979. He received the Master degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2002, where he is currently working toward the Ph.D. degree.
His present research interests include modeling theory and control-system theory applied to electrical drives and, in particular, sensorless control of permanent-magnet synchronous machines.View more
Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Thomas J. Vyncke (S'05) was born in Oostende, Belgium, in 1982. He received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2005, where he has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2005.
He received a Ph.D. grant from the Special Research Fund (BOF), Ghent University in 2005. In 2006, he was awarded a Ph.D. Fellowship from the Resea...Show More
Thomas J. Vyncke (S'05) was born in Oostende, Belgium, in 1982. He received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2005, where he has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2005.
He received a Ph.D. grant from the Special Research Fund (BOF), Ghent University in 2005. In 2006, he was awarded a Ph.D. Fellowship from the Resea...View more
Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Jan A. Melkebeek (SM'82) was born in Ghent, Belgium, in 1952. He received the Ingenieur degree in electrical and mechanical engineering, the Doctor in Applied Sciences degree, and the Doctor Habilitus degree from the University of Ghent, Ghent, Belguim, in 1975, 1980, and 1986, respectively.
He is Director of the Electrical Energy Laboratory (EELAB) and Head of the Department of Electrical Power Engineering, Systems and Au...Show More
Jan A. Melkebeek (SM'82) was born in Ghent, Belgium, in 1952. He received the Ingenieur degree in electrical and mechanical engineering, the Doctor in Applied Sciences degree, and the Doctor Habilitus degree from the University of Ghent, Ghent, Belguim, in 1975, 1980, and 1986, respectively.
He is Director of the Electrical Energy Laboratory (EELAB) and Head of the Department of Electrical Power Engineering, Systems and Au...View more
Department of Electrical Engineering and Energy Technology, Vrije Universiteit Brussel, Brussels, Belgium
Philippe Lataire received the M.S. degree in civil engineering and two Ph.D. degrees (one in applied science) from the University of Brussels (VUB), Brussels, Belgium, in 1975 and 1982, respectively.
Currently, he is a full-time Lecturer at VUB. The prime interests of his research are in the fields of electric drives, power electronics, and control.
Philippe Lataire received the M.S. degree in civil engineering and two Ph.D. degrees (one in applied science) from the University of Brussels (VUB), Brussels, Belgium, in 1975 and 1982, respectively.
Currently, he is a full-time Lecturer at VUB. The prime interests of his research are in the fields of electric drives, power electronics, and control.View more
Contents Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Tine L. Vandoorn (S'08) was born in Torhout, Belgium, in 1985. She received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2008, where she has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2008.
In 2009, she was awarded a Ph.D. Fellowship from the Research Foundation–Flanders (FWO). Her present research interests include parameter identification of electrical machines and control of electrical grids with distributed generation.
Tine L. Vandoorn (S'08) was born in Torhout, Belgium, in 1985. She received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2008, where she has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2008.
In 2009, she was awarded a Ph.D. Fellowship from the Research Foundation–Flanders (FWO). Her present research interests include parameter identification of electrical machines and control of electrical grids with distributed generation.View more
Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Frederik M. De Belie (M'05) was born in Belgium in 1979. He received the Master degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2002, where he is currently working toward the Ph.D. degree.
His present research interests include modeling theory and control-system theory applied to electrical drives and, in particular, sensorless control of permanent-magnet synchronous machines.
Frederik M. De Belie (M'05) was born in Belgium in 1979. He received the Master degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2002, where he is currently working toward the Ph.D. degree.
His present research interests include modeling theory and control-system theory applied to electrical drives and, in particular, sensorless control of permanent-magnet synchronous machines.View more
Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Thomas J. Vyncke (S'05) was born in Oostende, Belgium, in 1982. He received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2005, where he has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2005.
He received a Ph.D. grant from the Special Research Fund (BOF), Ghent University in 2005. In 2006, he was awarded a Ph.D. Fellowship from the Research Foundation–Flanders (FWO). His research interests are in the area of digital control of converter-fed electrical machines, including direct torque control, parameter identification, and sensorless control of permanent-magnet synchronous machines.
Thomas J. Vyncke (S'05) was born in Oostende, Belgium, in 1982. He received the M.S. degree in electromechanical engineering from Ghent University, Ghent, Belgium, in 2005, where he has been working toward the Ph.D. degree in the Electrical Energy Laboratory (EELAB) since 2005.
He received a Ph.D. grant from the Special Research Fund (BOF), Ghent University in 2005. In 2006, he was awarded a Ph.D. Fellowship from the Research Foundation–Flanders (FWO). His research interests are in the area of digital control of converter-fed electrical machines, including direct torque control, parameter identification, and sensorless control of permanent-magnet synchronous machines.View more
Department of Electrical Energy, Systems and Automation, Ghent University, Ghent, Belgium
Jan A. Melkebeek (SM'82) was born in Ghent, Belgium, in 1952. He received the Ingenieur degree in electrical and mechanical engineering, the Doctor in Applied Sciences degree, and the Doctor Habilitus degree from the University of Ghent, Ghent, Belguim, in 1975, 1980, and 1986, respectively.
He is Director of the Electrical Energy Laboratory (EELAB) and Head of the Department of Electrical Power Engineering, Systems and Automation (EESA) of Ghent University. His teaching activities and research interests include electrical machines, power electronics, variable-frequency drives, magnetic materials, and also control systems theory applied to electrical drives.
Prof. Melkebeek is a member of the Koninklijke Vlaamse Ingenieursvereniging (K.VIV), the Koninklijke Belgische Vereniging van Elektrotechnici (KBVE-SRBE), the Belgian Federation for Automatic Control (BIRA-IBRA), and a Fellow of the Institution of Electrical Engineers, U.K. He served as the President of the IEEE Benelux IAS-PELS joint chapter from 2002 to 2003 and is a long-time member of the IEEE-IAS Electric Machines Committee, the IEEE-IAS Electric Drives Committee, and the IEEE-PES Machine Theory Subcommittee.
Jan A. Melkebeek (SM'82) was born in Ghent, Belgium, in 1952. He received the Ingenieur degree in electrical and mechanical engineering, the Doctor in Applied Sciences degree, and the Doctor Habilitus degree from the University of Ghent, Ghent, Belguim, in 1975, 1980, and 1986, respectively.
He is Director of the Electrical Energy Laboratory (EELAB) and Head of the Department of Electrical Power Engineering, Systems and Automation (EESA) of Ghent University. His teaching activities and research interests include electrical machines, power electronics, variable-frequency drives, magnetic materials, and also control systems theory applied to electrical drives.
Prof. Melkebeek is a member of the Koninklijke Vlaamse Ingenieursvereniging (K.VIV), the Koninklijke Belgische Vereniging van Elektrotechnici (KBVE-SRBE), the Belgian Federation for Automatic Control (BIRA-IBRA), and a Fellow of the Institution of Electrical Engineers, U.K. He served as the President of the IEEE Benelux IAS-PELS joint chapter from 2002 to 2003 and is a long-time member of the IEEE-IAS Electric Machines Committee, the IEEE-IAS Electric Drives Committee, and the IEEE-PES Machine Theory Subcommittee.View more
Department of Electrical Engineering and Energy Technology, Vrije Universiteit Brussel, Brussels, Belgium
Philippe Lataire received the M.S. degree in civil engineering and two Ph.D. degrees (one in applied science) from the University of Brussels (VUB), Brussels, Belgium, in 1975 and 1982, respectively.
Currently, he is a full-time Lecturer at VUB. The prime interests of his research are in the fields of electric drives, power electronics, and control.
Philippe Lataire received the M.S. degree in civil engineering and two Ph.D. degrees (one in applied science) from the University of Brussels (VUB), Brussels, Belgium, in 1975 and 1982, respectively.
Currently, he is a full-time Lecturer at VUB. The prime interests of his research are in the fields of electric drives, power electronics, and control.View more
