Peak-to-Average Power Ratio Reduction in an FDM Broadcast System | IEEE Conference Publication | IEEE Xplore

Peak-to-Average Power Ratio Reduction in an FDM Broadcast System


Abstract:

Digital predistortion is a technique used to reduce the signal dynamic range in a multichannel system in order to improve power amplifier (PA) efficiency. These technique...Show More

Abstract:

Digital predistortion is a technique used to reduce the signal dynamic range in a multichannel system in order to improve power amplifier (PA) efficiency. These techniques have been developed for orthogonal frequency-division multi-plexing (OFDM) systems, but are not directly applicable to general frequency-division multiplexing (FDM) systems such as those used in broadcast. A modification to the tone injection approach allows constellation translations to be directly applied at the digital intermediate frequency (IF) domain and provides redundancy in lowering peak-to-average ratio (PAR). Simulation of a 24-channel 256-QAM FDM cable television transmission system shows a 3.3 dB PAR reduction at 10-6 clipping probability.
Date of Conference: 17-19 October 2007
Date Added to IEEE Xplore: 21 November 2007
ISBN Information:

ISSN Information:

Conference Location: Shanghai, China
Citations are not available for this document.

Cites in Papers - |

Contact IEEE to Subscribe

References

References is not available for this document.