Abstract:
In this paper it is shown, by means of suitable numerical simulations and laboratory experiments, that one-cycle control of switching converters operating in deep DCM doe...Show MoreMetadata
Abstract:
In this paper it is shown, by means of suitable numerical simulations and laboratory experiments, that one-cycle control of switching converters operating in deep DCM does not work properly. A simple solution is proposed in order to allow the right working of the system even under almost no-load conditions
Date of Conference: 21-24 May 2006
Date Added to IEEE Xplore: 11 September 2006
Print ISBN:0-7803-9389-9
ISSN Information:
Keywords assist with retrieval of results and provide a means to discovering other relevant content. Learn more.
- IEEE Keywords
- Index Terms
- Converter Operation ,
- Converter Control ,
- Discontinuous Conduction Mode ,
- One-cycle Control ,
- Numerical Simulations ,
- Simple Solution ,
- Work Systems ,
- No-load Condition ,
- Load Resistance ,
- Pulse Generator ,
- Average Voltage ,
- Switching Cycle ,
- Clock Signal ,
- Consecutive Pulses ,
- Diode Voltage ,
- Continuous Conduction Mode
Contents Keywords assist with retrieval of results and provide a means to discovering other relevant content. Learn more.
- IEEE Keywords
- Index Terms
- Converter Operation ,
- Converter Control ,
- Discontinuous Conduction Mode ,
- One-cycle Control ,
- Numerical Simulations ,
- Simple Solution ,
- Work Systems ,
- No-load Condition ,
- Load Resistance ,
- Pulse Generator ,
- Average Voltage ,
- Switching Cycle ,
- Clock Signal ,
- Consecutive Pulses ,
- Diode Voltage ,
- Continuous Conduction Mode
