Abstract:
In this paper, an analog correlator for impulse radio is designed using a sine wave as a correlating signal. The design of the low-power sine wave generation circuitry is...Show MoreMetadata
Abstract:
In this paper, an analog correlator for impulse radio is designed using a sine wave as a correlating signal. The design of the low-power sine wave generation circuitry is demonstrated and the analog multiplier using this waveform is implemented. The overall power consumption of the 8GHz LC-VCO and the divider-by-two circuit is 5mW
Date of Conference: 21-24 May 2006
Date Added to IEEE Xplore: 11 September 2006
Print ISBN:0-7803-9389-9
ISSN Information:
Department of Information Technology, University of Turku, Turku, Finland
Department of Information Technology, University of Turku, Turku, Finland
Laboratory of Electronics and Computer Systems, IMIT Royal Institute of Technology (KTH), Kista-Stockholm, Sweden
Department of Information Technology, University of Turku, Turku, Finland
Department of Information Technology, University of Turku, Turku, Finland
Department of Information Technology, University of Turku, Turku, Finland
Contents Department of Information Technology, University of Turku, Turku, Finland
Department of Information Technology, University of Turku, Turku, Finland
Laboratory of Electronics and Computer Systems, IMIT Royal Institute of Technology (KTH), Kista-Stockholm, Sweden
Department of Information Technology, University of Turku, Turku, Finland
Department of Information Technology, University of Turku, Turku, Finland
Department of Information Technology, University of Turku, Turku, Finland
