Abstract:
This paper is dealing with the electromechanical properties of a synthesized polyurethane elastomer film-based polyester. On the basis of the electrostatic-field induced ...Show MoreMetadata
Abstract:
This paper is dealing with the electromechanical properties of a synthesized polyurethane elastomer film-based polyester. On the basis of the electrostatic-field induced strain, dielectric, and stress-strain measurements carried out under ambient conditions, the electromechanical parameters such as thickness strain, apparent electrostrictive coefficient, effective pressure, mechanical energy density, and Maxwell-effect contribution, were determined. Thickness strain versus the static electric field showed a quadratic dependence up to about 6.3 MV/m, which is consistent with an electrostrictive response. The maximum induced strain of 7% obtained at 16 MV/m is higher than those reported in the literature on unprestrained polyurethane film with noncompliant electrodes. Remarkable apparent electrostrictive coefficient(sim 7.75 10^-16 hboxm^2/hboxV^2)and response time (600 ms) were found. Under the actual experimental conditions (rigid electrodes and maximum electrostatic field of 16 MV/m), the effective compressive pressure (0.9 MPa) and mechanical energy density (0.032hboxJ/cm^3) values are quite noticeable. A small Maxwell-effect contribution of only 0.32% was found. The electromechanical parameters of this polyurethane elastomer indicate that this material is potentially useful for practical actuators and sensors.
Published in: IEEE Sensors Journal ( Volume: 6, Issue: 4, August 2006)