Abstract:
LLC converters benefit from soft switching and sinusoidal currents over dual active bridge (DAB) converters. The design process of an LLC converter involves the selection...Show MoreMetadata
Abstract:
LLC converters benefit from soft switching and sinusoidal currents over dual active bridge (DAB) converters. The design process of an LLC converter involves the selection of resonant tank inductor, capacitor, magnetizing inductance, resonant frequency, and transformer turns ratio for proper operation within the desired range of voltages and power. However, the design and control of frequency-modulated LLC converters in wide voltage range applications is challenging due to the wide range of switching frequencies. Topology morphing control is an established technique utilized for countering the challenges of wide voltage range LLC operation. This work provides a design framework for an LLC converter with topology morphing for wide voltage range applications. The proposed design framework uses time domain analysis and a power loss model to evaluate the optimal converter parameters for efficiency maximization over the entire voltage range. Methodology of implementing online topology morphing with closed-loop control in a digital signal processor (DSP) considering an on-board battery charger (OBC) application is also provided. The design optimization process and control methodology are validated through a 300–700 V input, 250–450 V output, 3.3 kW hardware demonstrator. An experimental peak efficiency of 97.72% is achieved compared to a calculated 97.63% efficiency, proving the accuracy of the analytical model. Time weighted averaged efficiency above 96.7% is observed over the entire voltage range.
Published in: IEEE Open Journal of Power Electronics ( Volume: 5)
A Fast Computational Model of Arbitrary Battery Network Topology with Time-varying Working Conditions
Congjia Zhang,Chao Gao,Yue Chen,Ende Lin,Feng Yang,Yanglin Zhou,Song Ci,Chongqing Kang
A Model-Based Research on Performance Evaluation and Topology Optimization of Series-Parallel Lithium-Ion Battery Packs
Xudong Liu,Fan Qu,Quanming Luo,Huan Liang,Pengju Sun,Xiong Du
Topology Design and Analysis of Bidirectional Battery DC-DC Converter for DC Grid Voltage Control
Hanwen Mao,Shuyu Cao,K. J. Tseng,Liang Boon Wee
Modeling stationary lithium-ion batteries for optimization and predictive control
Emma Raszmann,Kyri Baker,Ying Shi,Dane Christensen
Estimation of battery parameters of the equivalent circuit model using Grey Wolf Optimization
Venu Sangwan,Rajesh Kumar,A. K. Rathore
Accelerating Federated Edge Learning via Topology Optimization
Shanfeng Huang,Zezhong Zhang,Shuai Wang,Rui Wang,Kaibin Huang
Use of Nonlinear Design Optimization Techniques in the Comparison of Battery Discharger Topologies for the Space Platform
D.M. Sable,B.H. Cho,F.C. Lee
Design and optimization of a grid connected residential PV-system with Battery Energy Storage System
Tom Crauwels,Mauricio Dalla Vecchia,Simon Ravyts,Johan Driesen
Grid Operation Enhancement via Network Topology Optimization With Sparse Tableau Formulation
Sogol Babaeinejadsarookolaee,Byungkwon Park,Bernard Lesieutre,Christopher L. DeMarco