Predicting Arterial Stiffness from Single-Channel Photoplethysmography Signal: A Feature Interaction-Based Approach

Arterial stiffness (AS) serves as a crucial indicator of arterial elasticity and function, typically requiring expensive equipment for detection. Given the strong correlation between AS and various photoplethysmography (PPG) features, PPG emerges as a convenient method for assessing AS. However, the limitations of independent PPG features hinder detection accuracy. This study introduces a feature selection method leveraging the interactive relationships between features to enhance the accuracy of predicting AS from a single-channel PPG signal. Initially, an adaptive signal interception method was employed to capture high-quality signal fragments from PPG sequences. 58 PPG features, deemed to have potential contributions to AS estimation, were extracted and analyzed. Subsequently, the interaction factor (IF) was introduced to redefine the interaction and redundancy between features. A feature selection algorithm (IFFS) based on the IF was then proposed, resulting in a combination of interactive features. Finally, the Xgboost model is utilized to estimate AS from the selected features set. The proposed approach is evaluated on datasets of 268 male and 124 female subjects, respectively. The results of AS estimation indicate that IFFS yields interacting features from numerous sources, rejects redundant ones, and enhances the association. The interaction features combined with the Xgboost model resulted in an MAE of 122.42 and 142.12 cm/sec, an SDE of 88.16 and 102.56 cm/sec, and a PCC of 0.88 and 0.85 for the male and female groups, respectively. The findings of this study suggest that the stated method improves the accuracy of predicting AS from single-channel PPG, which can be used as a non-invasive and cost-effective screening tool for atherosclerosis.