Fabrication of a Wide-bore 3T Animal MRI Superconducting Magnet | IEEE Conference Publication | IEEE Xplore
Scheduled Maintenance: On Monday, 30 June, IEEE Xplore will undergo scheduled maintenance from 1:00-2:00 PM ET (1800-1900 UTC).
On Tuesday, 1 July, IEEE Xplore will undergo scheduled maintenance from 1:00-5:00 PM ET (1800-2200 UTC).
During these times, there may be intermittent impact on performance. We apologize for any inconvenience.

Fabrication of a Wide-bore 3T Animal MRI Superconducting Magnet


Abstract:

A wide-bore 3T animal MRI superconducting magnet was successfully fabricated. In this manuscript, the structure of the superconducting magnet and its fabricated process w...Show More

Abstract:

A wide-bore 3T animal MRI superconducting magnet was successfully fabricated. In this manuscript, the structure of the superconducting magnet and its fabricated process was described in detail, which included insulation treatment, coil winding, and binding treatment. As the magnet completed, the superconducting wire shows good insulation performance with the former and binding belt, The superconducting magnet was magnetized to 3.0014T and the measured peak-to-peak homogeneity was about 217 ppm.
Date of Conference: 27-29 October 2023
Date Added to IEEE Xplore: 09 January 2024
ISBN Information:
Conference Location: Tianjin, China

Contact IEEE to Subscribe

References

References is not available for this document.