DIT and Beyond: Interdomain Routing With Intradomain Awareness for IIoT

Along with the ever-increasing amount of data generated from industrial devices, the cross domain [also known as autonomous systems (ASs)] data transmission problem has attracted more and more attention in the Industrial Internet of Things (IIoT). As mature and widely used interdomain routing protocols, border gateway protocol-based solutions often take the number of domains (i.e., AS hops) of each path as a criterion to make routing decisions, which is simple and effective. However, such protocols can only meet the reachability requirements while ignoring the performance requirements. That is, the path with the minimum AS hops will be selected to carry flows, even if the actual performance of this path does not meet the transmission requirements due to the unawareness of intradomain information on that path. But it is not impractical to directly access intradomain information for making better routing decisions given data privacy concerns. In this article, we propose M-DIT, which can make interdomain routing decisions with the assistance of desensitized intradomain information for multiple-requirement transmissions. To do so, we design a homomorphic encrypted-based private number comparison scheme to export intradomain information securely and, thus, assist in routing decisions. The results of some experiments based on five real topologies (
ATMnet
,
Claranet
,
Compuserve
,
NSFnet
, and
Peer1
) with thousands of interdomain flows demonstrate that M-DIT reduced flow completion time by about 60% or selected high bandwidth paths flexibly for interdomain routing for IIoT scenarios.