Abstract:
A method is presented to select and control the distribution of steady state load on motors in dual drive conveyors. Any configuation, including ganged motors or remotely...Show MoreMetadata
Abstract:
A method is presented to select and control the distribution of steady state load on motors in dual drive conveyors. Any configuation, including ganged motors or remotely located drives, can be handled and only nameplate data is required. The method applies to any type of drive motor. The constraints on operating point selection are reviewed and several typical configurations are presented. The operating point is calculated for an example system.
Published in: 1982 Annual Meeting Industry Applications Society
Date of Conference: 04-07 October 1982
Date Added to IEEE Xplore: 16 May 2023
Print ISBN:978-1-5090-3187-0
Print ISSN: 2576-702X
Conference Location: San Francisco, CA, USA
