Abstract:
This paper compares the non-modulated square-wave voltage injection-based and sinusoidal voltage injection-based polarity detection methods applicable in sensorless PMSM ...Show MoreMetadata
Abstract:
This paper compares the non-modulated square-wave voltage injection-based and sinusoidal voltage injection-based polarity detection methods applicable in sensorless PMSM drives. A quadratic PMSM model extension is presented that serves as a basis for the polarity detection techniques. The comparison includes the polarity-dependent current components produced by the injected signals, the design parameters related to the injected signal features and their effect on the probability of correct polarity detection. The performance differences and possible application areas are also discussed.
Date of Conference: 25-28 September 2022
Date Added to IEEE Xplore: 01 December 2022
ISBN Information:
ISSN Information:
Funding Agency:
Keywords assist with retrieval of results and provide a means to discovering other relevant content. Learn more.
- IEEE Keywords
- Index Terms
- Permanent Magnet Synchronous Motor ,
- Square Wave Signal ,
- Polarity Detection ,
- Sinusoidal Signal Injection ,
- Design Parameters ,
- Detection Probability ,
- Quadratic Model ,
- Correct Detection ,
- Sinusoidal Voltage ,
- Operating Conditions ,
- Current Sample ,
- Current Measurements ,
- Taylor Series ,
- Direct Current ,
- Current Response ,
- Saturation Magnetization ,
- Permanent Magnet ,
- Heaviside Function ,
- Dc-link Voltage ,
- Magnetic Poles ,
- Rotor Position ,
- Injection Strategy ,
- Voltage Injection ,
- Fundamental Harmonics ,
- Clock Cycles ,
- Reverse Rotation ,
- Voltage Equation ,
- Injection Frequency ,
- Positive Pulse ,
- Important Design Parameter
- Author Keywords
Keywords assist with retrieval of results and provide a means to discovering other relevant content. Learn more.
- IEEE Keywords
- Index Terms
- Permanent Magnet Synchronous Motor ,
- Square Wave Signal ,
- Polarity Detection ,
- Sinusoidal Signal Injection ,
- Design Parameters ,
- Detection Probability ,
- Quadratic Model ,
- Correct Detection ,
- Sinusoidal Voltage ,
- Operating Conditions ,
- Current Sample ,
- Current Measurements ,
- Taylor Series ,
- Direct Current ,
- Current Response ,
- Saturation Magnetization ,
- Permanent Magnet ,
- Heaviside Function ,
- Dc-link Voltage ,
- Magnetic Poles ,
- Rotor Position ,
- Injection Strategy ,
- Voltage Injection ,
- Fundamental Harmonics ,
- Clock Cycles ,
- Reverse Rotation ,
- Voltage Equation ,
- Injection Frequency ,
- Positive Pulse ,
- Important Design Parameter
- Author Keywords