Loading web-font TeX/Math/Italic
A 17.7–20.2-GHz 1024-Element K-Band SATCOM Phased-Array Receiver With 8.1-dB/K G/T, ±70° Beam Scanning, and High Transmit Isolation | IEEE Journals & Magazine | IEEE Xplore

A 17.7–20.2-GHz 1024-Element K-Band SATCOM Phased-Array Receiver With 8.1-dB/K G/T, ±70° Beam Scanning, and High Transmit Isolation


Abstract:

This article presents a wideband scalable 17.7–20.2-GHz 1024-element K -band satellite communication (SATCOM) receive (Rx) phased array with reconfigurable polarizatio...Show More

Abstract:

This article presents a wideband scalable 17.7–20.2-GHz 1024-element K -band satellite communication (SATCOM) receive (Rx) phased array with reconfigurable polarization. The phased array uses silicon Rx beamformer (BF) chips and silicon low-noise amplifiers (LNAs) and is able to receive either linear, rotated linear, circular clockwise, or anticlockwise polarization. It demonstrates a measured 3.47° half-power beamwidth (HPBW), more than 25-dB cross-polar discrimination (XPD), and +8.1-dB/K gain-to-noise (G/T) per polarization, and has more than 80-dB Tx-band isolation. The phased array is able to scan to ±70° in all planes without grating lobes and \cos ^{1-1.2}(\theta) scan loss. The array aperture measures 22.4 cm \times22.4 cm. To our knowledge, this is the largest single printed circuit board (PCB) SATCOM K -band phased-array receiver to date with the highest G/T and represents the highest level of integration at millimeter waves.
Published in: IEEE Transactions on Microwave Theory and Techniques ( Volume: 70, Issue: 3, March 2022)
Page(s): 1769 - 1778
Date of Publication: 02 February 2022

ISSN Information:

Funding Agency:


References

References is not available for this document.