Loading [MathJax]/extensions/MathMenu.js
Real-Time Ultra-Wideband Channel Sounder Design for 3–18 GHz | IEEE Journals & Magazine | IEEE Xplore

Real-Time Ultra-Wideband Channel Sounder Design for 3–18 GHz


Abstract:

This paper presents the system design, calibration, and example measurements of a novel ultra-wideband, low-cost, real-time channel sounder. The channel sounder operates ...Show More

Abstract:

This paper presents the system design, calibration, and example measurements of a novel ultra-wideband, low-cost, real-time channel sounder. The channel sounder operates in the frequency range from 3 to 18 GHz with a 15-GHz bandwidth thus providing a Fourier delay resolution of 66.7 ps. It sequentially measures overlapping sub-bands of 1-GHz bandwidth to cover the whole frequency range. By using a waveform generator and a digitizer with relatively lower sample rates, the design significantly lowers the cost compared with sampling the whole band simultaneously. With the transmitting power of 40 dBm, the maximum measurable path loss is 132 dB without accounting for possible antenna gains. In this paper, we also describe the calibration procedure along with the method to stitch sub-bands into a combined channel response across 15 GHz of bandwidth. The channel sounder performance is compared with a vector network analyzer (VNA) measurements acquired in the same static channels. In contrast to VNAs, however, our channel sounder can measure the whole band in 6 ms and can, thus, operate in dynamic environments with coherence time more than 6 ms. Additionally, we present sample results from a measurement campaign performed in an indoor corridor investigating the delay spreads statistics over the range of 3–18 GHz.
Published in: IEEE Transactions on Communications ( Volume: 67, Issue: 4, April 2019)
Page(s): 2995 - 3008
Date of Publication: 24 December 2018

ISSN Information:

Funding Agency:


References

References is not available for this document.