Loading [MathJax]/extensions/MathMenu.js
Measuring Crack Movement in Reinforced Concrete Using Digital Image Correlation: Overview and Application to Shear Slip Measurements | IEEE Journals & Magazine | IEEE Xplore

Measuring Crack Movement in Reinforced Concrete Using Digital Image Correlation: Overview and Application to Shear Slip Measurements


Abstract:

Reinforced concrete infrastructure assets built during the last century are required to stay in-service beyond their intended design lives, which requires techniques that...Show More

Abstract:

Reinforced concrete infrastructure assets built during the last century are required to stay in-service beyond their intended design lives, which requires techniques that allow the effects of deterioration and overloading to be monitored to ensure these assets are still fit for purpose. One such indicator of distress in a reinforced concrete structure is crack movement; models have been proposed that allow the internal stresses within a structure to be estimated if crack width and slip can be measured. This paper introduces a technique that uses digital image correlation (DIC) to measure not only crack width but also crack slip. The effect of curvature on this measurement technique is discussed and a method for minimizing the errors due to curvature is presented. The technique is used to measure crack width and slip in reinforced concrete beams with both small crack slip and significant crack slip. The results suggest that the technique can be used to measure crack movement in beams once the effects of curvature are accounted for. Future research in this area will focus on development of this technique for use in the field.
Published in: Proceedings of the IEEE ( Volume: 104, Issue: 8, August 2016)
Page(s): 1561 - 1574
Date of Publication: 30 March 2016

ISSN Information:

Funding Agency:


References

References is not available for this document.