Abstract:
The induction motor equivalent circuit parameters are required for many performance and planning studies involving induction motors. These parameters are typically calcul...Show MoreNotes: As originally published there is an error in this document. The authors state: "equation (13) similar to "equation (11), this equation should be: PCore = PLoss * FCore. Equation (12) is correct." The original PDF remains unchanged.
Metadata
Abstract:
The induction motor equivalent circuit parameters are required for many performance and planning studies involving induction motors. These parameters are typically calculated from standardized motor performance tests, such as the no load, full load, and locked rotor tests. However, standardized test data is not typically available to the end user. Alternatively, the equivalent circuit parameters may be estimated based on published performance data for the motor. This paper presents an iterative method for estimating the induction motor equivalent circuit parameters using only the motor nameplate data.
Notes: As originally published there is an error in this document. The authors state: "equation (13) similar to "equation (11), this equation should be: PCore = PLoss * FCore. Equation (12) is correct." The original PDF remains unchanged.
Published in: 2012 North American Power Symposium (NAPS)
Date of Conference: 09-11 September 2012
Date Added to IEEE Xplore: 22 October 2012
ISBN Information: