Development of a high-resolution four-layer DOI detector using MPPCs for brain PET

A new high-resolution four-layer DOl detector using MPPCs for brain PET scanner has been developed. The new depth of interaction (DOl) detector was designed to compose of four layers of detector units, which were lined up five axially. Each of the detector units consists of a LYSO scintillator array finely segmented of 1.2 mm and an 8 × 8 array of multi-pixel photon counters (MPPCs), which are one of the products of silicon photomultiplier family. The MPPC is so compact and insensitive to gamma-ray that the detector units can be piled up with a small gap between each scintillator array in the depth direction. In order to have the detector in every layer equally sensitive to gamma-ray, the scintillator thickness was designed at 3 mm, 4 mm, 5 mm and 8 mm toward the bottom respectively, and the total thickness was 20 mm. We adopted an internal focused laser processing technique to a monolithic LYSO scintillator and fabricated a 2D segmented array of 32 × 32 with 1.2 mm pitch in 38.4 mm square cross-section. Each detector layer has independently front end circuits including ASICs for MPPCs and signal processing circuits for crystal identification, energy and timing detection. Each data set of four layers are fed into data interface circuits placed behind detector layers and transferred to a data acquisition unit as formatted list-mode data. The performance of the four-layer DOl detector has been evaluated. The coincidence timing resolution of the detector, with a reference BaF
₂
detector, was obtained 850 ps FWHM. The average energy resolution value was 24.5% at 511 keV. The crystal separation with finely segmented LYSO scintillator was also good enough at each layer.