IEEE Canadian Journal of Electrical and Computer Engineering | All Volumes | IEEE Xplore

Issue 4 • Fall-2022

Loading...

Front Cover

Publication Year: 2022,Page(s):C1 - C1

Front Cover

IEEE Canadian Journal of Electrical and Computer Engineering

Publication Year: 2022,Page(s):C2 - C2

IEEE Canadian Journal of Electrical and Computer Engineering

Table of Contents

Publication Year: 2022,Page(s):i - ii

Table of Contents

At leading technology nodes, the industry is facing a stiff challenge to make profitable integrated circuits (ICs). One of the primary issues is the design rule checking (DRC) violation. This research cohort with the DARPA IDEA program aims for “no-human-in-the-loop” and 24-h turnaround time to implement an IC from design specifications. In order to reduce human effort, this work introduces the en...Show More
This article aims to realize a self-excited wound rotor synchronous machine (WRSM) topology established while considering the subharmonic field excitation scheme. Unlike the conventional subharmonic-based brushless WRSMs that require a dual-inverter configuration, the proposed topology uses a single inverter and a dual-armature winding pattern. The employed dual-armature winding configuration invo...Show More
This article presents, a mutual coupling reduction technique between a very closely spaced (1.8 mm) two-element microstrip-based multiple-input multiple-output (MIMO) antennas using a modified inverted-fork-shaped decoupling (m-IFSD) structure. The m-IFSD structure consists of an inverted fork and a cross-shaped structure with a shorted via. The combined effect of inverted-fork and shorted cross-s...Show More
To minimize the outage time and costs associated with faults on high voltage direct current (HVdc) transmission lines it is critical to locate faults in an accurate and sufficiently fast manner. Current fault location techniques based on artificial intelligence (AI) are accurate but require fault data from rectifying and inverting ends. This necessitates a communications system and incurs high com...Show More
This article proposes isolated bidirectional micro dc-ac single phase controlled (IBMSC) converter based on in-phase–voltage pulsewidth modulation (IPWM). This resonant IPWM converter, ratio of voltage conversion can be controlled from 0 to $\infty $ . So, this converter is highly referred for huge range voltage conversion. However, voltage conversion ratio determines power transfer direction and...Show More
Radio frequency fingerprint (RFF) based authentication of wireless devices can be used in the fields of the access security at the physical-layer of wireless networks and radio spectrum management. However, the stability of RFF is easily damaged by the wireless multipath fading channel in mobile communications. An RFF fingerprinting method with the nonlinearity and in-phase and quadrature (IQ) imb...Show More
Overhead transmission lines play a key role in ensuring power system security and reliability in this current smart society. The overhead transmission line operates in a very complex terrain thereby making it vulnerable to various kinds of faults. Most transmission line faults lead to interruption in power supplies and therefore the need for a fast repair to restore the system to its normal state....Show More
In a photovoltaic (PV) system-based microgrid, maximum power point tracking (MPPT) control plays a crucial role to improve the efficiency and stability. Since the past few years, one of the key control schemes to enhance the effectiveness of the microgrid is the observer-based MPPT control. This article proposes a higher order sliding mode observer (HOSMO)-based integral sliding mode control (ISMC...Show More
Dual-stator single-rotor (DSSR) machines are designed to generate two different output voltages independently and simultaneously. These generators are finding their place in various directly coupled engine-driven applications due to their better performance and efficiency. In this study, a dual-stator permanent magnet (PM) generator for auxiliary power generator applications has been modeled and a...Show More
Smart health is a relatively new paradigm where information and communication technology is utilized to improve health care and medical services. In this article, we provide a literature-based overview of smart health systems, their components, architecture, technologies, benefits, applications, challenges, and opportunities. In addition, we discuss the potential benefits of big data, data analyti...Show More
This work aims to minimize the power consumption of cloud virtualization components by addressing the important challenge of designing allocation schemes that cater for both radio and computational resources in a virtualized cloud-based radio environment. Unlike previous efforts, we consider the realistic behavior of radio resource heads (RRHs) associated with one baseband unit (BBU), acting as a ...Show More
The switched reluctance motor (SRM) has more salient features such as high starting torque, isolation of phase windings, and no rotor windings. Similarly, a permanent magnet brushless direct current (BLDC) motor possesses numerous merits such as high power density, and low torque ripple. However, this SRM and permanent magnet BLDC motor suffer from torque ripple and cogging torque, respectively. T...Show More
Industries need solutions that can automatically monitor oil leakage from deployed underwater pipelines and to rapidly report any damage. The location prediction of mineral reservoirs like oil, gas, or metals in deep water is a challenge during the extraction of these resources. Moreover, the problem of ores and mineral deposits on the seafloor comes into play. The abovementioned challenges necess...Show More

Contact Information

Co-Editor-in-Chief
Dr. Xiaodong Liang
University of Saskatchewan
Saskatoon,SK
Canada
xiaodong.liang@usask.ca

Contact Information

Co-Editor-in-Chief
Dr. Xiaodong Liang
University of Saskatchewan
Saskatoon,SK
Canada
xiaodong.liang@usask.ca