Qualification of the LHC Corrector Magnet Production With the CERN-Built Measurement Benches

The LHC will incorporate about 7600 superconducting single aperture corrector magnets mounted in the main magnet cold masses. In order to follow up their production, we have designed and built 12 different benches for warm magnetic measurements based on rotating coils. Each bench was manufactured in two copies, one installed at the industry sites and the other kept at CERN for cross checks and monitoring of the measurement quality. These systems measure the main field, the field quality and the position and orientation of the field relative to the mechanical construction, all properties that are required for an effective use of the magnets. After calibration, the benches automatically refer the measured quantities to the mechanical interfaces used to align the correctors in the cold masses (pin holes or keys). In this paper we evaluate the global uncertainty achieved with the benches and compare the field measurements performed at room temperature in industry with measurements at 1.9 K performed at CERN on samples of each corrector type.