SeqBalance: Congestion-Aware Load Balancing With No Reordering in Data Center Networks

With the rapid development of the Internet of Things (IoT), an increasing amount of sensor data generated by IoT applications has been transferred to data center networks for storage and data analysis. remote direct memory access (RDMA) is widely used in data center networks because of its high performance. However, due to the characteristics of RDMA’s retransmission strategy, current load balancing schemes for data center networks are unsuitable for RDMA. In this article, we propose SeqBalance, a load balancing framework designed for RDMA. SeqBalance implements fine-grained load balancing for RDMA through a reasonable design and does not cause reordering problems. SeqBalance detects link congestion at the switch by sensing ECN signals and link utilization, and guides routing decisions accordingly. SeqBalance’s designs are all based on existing commercial RNICs and commercial programmable switches, so they are compatible with existing data center networks. We have implemented SeqBalance Shaper for fine-grained subflow splitting in Mellanox CX-6 RNIC and implemented routing decisions in Intel Tofino P4 programmable switch. The results of hardware testbed experiments and large-scale simulations show that compared with existing load balancing schemes, SeqBalance improves 24.7% and 15.9% on average FCT and the 99th-percentile FCT.