Advanced Fanout Packaging Technology for Hybrid Substrate Integration

Advanced packaging technologies such as 2.5D Si TSV interposer, Fanout RDL interposer and 3D hybrid bonding packaging have been developed for chiplets and system heterogeneous integrations to fulfil the continuous pursuit of higher performance, higher bandwidth, lower power consumption, higher capacity and lower cost. However, the new heterogeneous integration solutions especially for HPC, AI and edge computing applications have also urged the demands for the laminated substrates with higher density interconnects and larger footprint body sizes. Conventional laminated substrate such as flip-chip ball grid array (FCBGA) package with multi-layer (typically over 10 layers) will suffer higher cost from the yield loss with the increasing substrate layer counts and body size.In this paper, the new packaging solutions of combining high density fanout with laminated substrate were developed. Two different high density fanout (FO) solutions named chip first and chip last for a single ASIC chip on standard ABF laminated substrates with different body sizes and layer counts were introduced. This new packaging technology was called Fanout BGA (FOBGA). The passive components were also embedded on redistribution layer (RDL) for FO chip last hybrid substrate. The test vehicles and process flows for both FOBGA chip first and chip last solutions were also elaborated. The warpage of different TVs was also demonstrated. Furthermore, the package signal integrity (SI) and power integrity (PI) performance for FO on substrate were conducted by electrical stimulations. The impacts of RDL routing and RDL line and spacing (L/S) on electrical performance of FOBGA package were also discussed. Finally, the design guidance of FO on substrate to improve the performance by reducing substrate layer counts were proposed. The high density FO on substrate has provided the higher density interconnect than that of conventional laminated substrate, it also has demonstrated the flexibility to reuse substrate and good potential to leverage standard laminate substrate without increasing body size and layer counts for high performance applications.