MR Conditionality of Abandoned Leads from Active Implantable Medical Devices at 1.5T

During Magnetic Resonance (MR) scans, abandoned leads from active implantable medical devices (AIMDs) can experience excessive heating near the lead-tip, depending on the types of termination applied to the proximal end. The influence of different proximal treatments, i.e., (i) freely exposed in the tissue, (ii) capped with metallic material, and (iii) capped with plastic material on the RF-induced heating are studied. Abandoned leads from a sacral neuromodulation (SNM) system were investigated in this study. The device models, i.e., the transfer functions, for different proximal treatments were developed. These models are then used to assess the in-vivo lead-tip heating inside four virtual human models (FATS, Duke, Ella, and Billie). The RF-induced heating from these abandoned leads with different proximal end treatments are compared with the lead-tip heating of the original AIMD system. The maximum lead-tip heating for abandoned leads using metal cap at the proximal end is lower than that from the original intact AIMD system. Abandoned leads with plastic cap treatment at the proximal end will lead to an average in-vivo temperature that is 3.5 times higher than that from the original intact AIMD system. Therefore, from this study and in terms of the RF-induced heating, the abandoned leads with metallic cap treatment at the proximal end can maintain the MR conditionality of the original AIMD system.Clinical Relevance— The different treatments of proximal end of the abandoned leads from AIMD are studied to ensure that MR Conditional AIMD leads remain MR Conditional when the leads are abandoned in the patients.