High-power microwave generation using a ferroelectric cathode electron gun

A two-stage 500 kV 200-A ferroelectric electron gun has been designed, fabricated, tested, and used in a high power microwave amplifier experiment. We report on the operational characteristics of the gun including measurements of the beam dynamics. The optimum conditions for application of the trigger and its timing are also reported. Faraday cup measurement shows that the beam radius is 4.1 mm, in good agreement with simulation. The gun is designed for use in traveling-wave tube amplifiers, and testing of an X-band amplifier driven by the gun is reported. A peak output power of 5.9 MW has been observed from a single stage amplifier driven by a 100 A. 450 kV beam. This corresponds to energy converging efficiency of 13.1% and is the first observation of high power (/spl sim/MW) microwave generation using the beam generated from a ferroelectric cathode,.