Dynamic motion of a conductive particle in viscous fluid under DC electric field

When plastic waste is liquefied for recycling, the impurities present could influence the quality of the reprocessed products. In order to explore the possible method for removing solid impurities using electrostatic forces, the motion of spherical conductive particles under a uniform electric field has been carefully investigated. In this paper, a solid impurity and liquefied plastics are simulated by a conductive spherical particle and viscous insulating liquid, silicone oil, respectively. Experimental results indicate that the particle undergoes repeated motion between the parallel electrodes. The motion of the particle can be divided into four modes: settling on the lower electrode, moving upward, settling on the upper electrode, and moving downward. The higher the applied voltage, the faster the average particle velocity and the shorter the resting time of the particle. The particle accelerates after leaving the electrode and decelerates before reaching the other electrode. This deceleration could be explained by the viscous effect of the liquid layer between the particle and the electrode. The settling mode could be explained by the fact that there is a liquid flow induced by the particle motion and it pushes the particle against the electrode until the flow decreases. It is, therefore, suggested that the hydrodynamic effect is dominant in our case, as well as the electrostatic force.