Noise Analysis and Design Considerations for Equalizer-Based Optical Receivers

Optical receiver front ends that are intentionally designed to have a bandwidth low enough that significant inter-symbol interference (ISI) is introduced are becoming commonplace. Although the resultant ISI must be removed using an equalizer, the lower bandwidth allows for higher gain in the front-end's first stage, lower input-referred noise, and fewer gain stages. With fewer main-amplifier stages, power dissipation is reduced. The noise analysis of these front ends presents several challenges. This paper derives integrated input-referred noise for inverter-based shunt-feedback transimpedance amplifiers from first principles and highlights the importance of correctly estimating the gain and noise bandwidth of the receiver. The notion of the effective gain of the receiver is introduced, which is lower than the midband gain typically used in noise calculations. The analysis of the inverter-based TIA is used to discuss the important design tradeoffs depending on the type of equalizer used. Integrated input-referred noise is derived and compared for front ends using decision-feedback equalizers (DFEs), continuous-time linear equalizers, and feed-forward equalizers. The simulation results show that a DFE-based receiver achieves the lowest input-referred noise.