Output Current Optimization for Multibrick Parallel Discharge Drivers Based on Genetic Algorithm

By triggering the switches in sequence and controlling the brick charging voltage independently, a pulsed power system can generate flexible current waveform in the load, which could allow high-accurate magnetic pressure in experimental materials in the study of EOS data and dynamic response of material characterization. Currently, a 1.5-MA driver with 20 independent bricks has been developed, and a programmable 256-brick parallel discharge driver which is able to generate shaped current greater than 6.5 MA is under construction in the China Academy of Engineering Physics. In this paper, for these two multibrick parallel discharge drivers, the method of optimizing the output current waveform of the driver is studied by using the genetic algorithm and the corresponding optimization results of different target current waveforms are obtained. An experimental platform is set up for studying the gas switch breakdown characteristics. The self-breakdown and triggering breakdown experiments of the switch are conducted, and its breakdown characteristics are researched. Meanwhile, the effect of breakdown delay and jitter on the output current waveform is studied by simulation. This paper is of great significance to the actual operation of the multibrick parallel discharge drivers.