Plasma treatment to improve the hydrophobicity of contaminated silicone rubber — the role of LMW siloxanes

Silicone rubber is widely used in power system insulation for its hydrophobicity and hydrophobicity transfer to prevent pollution flashover. The influence of low molecular weight (LMW) siloxanes on hydrophobicity of contaminated silicone rubber after plasma jet treatment was investigated in this study. Experimental results show that plasma jet treatment for several seconds can significantly improve the hydrophobicity of contaminated silicone rubber. LMW siloxanes play an important role in the quick recovery of hydrophobicity induced by plasma jet treatment. Extraction of the LWM siloxanes from the silicone rubber decreases the contact angle after plasma treatment. Fourier transform infrared (FTIR) spectroscopy shows that hydrophobic groups appear on the surface of the contamination layer. The hydrophobicity improvement of contaminated silicone rubber results from LMW siloxanes transferred to the contamination layer during plasma treatment and the LMW siloxanes are mostly original uncrosslinked siloxanes in the silicone rubber. The molar mass distributions of the LMW siloxanes in hydrophobic contamination of treated specimens were similar with naturally transferred ones. X-ray photoelectron spectroscopy shows that an inorganic layer appears after plasma aging, which obscures the transfer of LMW siloxanes and reduce the hydrophobicity during plasma treatment.