Multishot Damage of Insulator in a Medium-Caliber and High Linear Current Density Launcher

As an important part of pulsed high-current launcher, insulator takes the functions of electrical insulation and support. Surveys were conducted after multishot to analysis matrix damage and insulation performance of insulator based on a medium-caliber and high linear current density launcher. Mechanical damage of matrix is mainly related to local current. The most serious damage located at zone of flattop and initial decline stage. In addition, serious damage may be caused by sprayed molten aluminum rather than high-temperature plasma. Metal contamination is dominated by local current and contact condition of rail-armature. There are more metal deposits on surface of high current and high muzzle voltage zones, and corresponding flashover voltages decrease significantly. Considering the effect of different damage forms and the operation conditions, the main damage form is matrix ablation located at the contact position of rail-insulator rather than the degradation of electrical insulation. Moreover, the main damage form of bore insulators is different for variety of caliber and linear current density launchers. Insulation damage may be considered mainly in small-caliber and low linear current density launcher, while mechanical damage may be considered mainly in large-caliber launcher and high linear current density launcher.