Engineering Methodology to Provide Integrity of the ITER Port Plug Onboard Components Dynamically Responding to Plasma Transients Combined With Seismic Events

Forschungszentrum Jülich and partners are developing the ITER core charge exchange spectroscopy (cCXRS) hosted by upper port plug#3 (UPP). The system should withstand loading due to the plasma transients resulting in electromagnetic (EM) forces acting on the UPP and its onboard components. On the other hand, the eddy currents and shock dynamic EM loads occur in the vacuum vessel (VV) and make it vibrate. As a result, it excites the UPP and, consequently, its onboard components. The computational problem is a superposition of these solutions: 1) the deterministically calculated time-history UPP response to the applied EM forces and 2) the UPP response to the VV excitations that are specified as floor response spectra (FRS) at the port stub (attachment to the VV). On the top of this, the EM loads should be combined with the seismic ones which are also specified as an FRS. This paper considers a potential methodology for combining plasma transients with seismic events. A numerical modeling of the UPP hosting a specific cCXRS component is presented. This methodology gives a direct and transparent engineering way to estimate the mechanical strength of the UPP onboard components. The analysis uses port stub FRS input and does not depend on a spectra-to-spectra recalculation procedure (from VV to component attachment) that is well established for the seismic-type response spectra but is not validated for the FRS due to the plasma transients.