Flicker-Free Single-Switch Quadratic Boost LED Driver Compatible With Electronic Transformers

MR16 lighting system with a high-frequency step-down electronic transformer is widely used in commercial lighting. In this paper, a single-switch quadratic boost light emitting diode (LED) driver compatible with electronic transformers for the MR16 lighting system is proposed and analyzed. It combines a prestage boost power factor correction (PFC) converter and a second-stage boost dc-dc converter with a single switch. The effect of the dc link voltage ripple of the prestage boost PFC converter on the output of the second-stage boost dc-dc converter is eliminated by a fast voltage mode control loop of a second-stage circuit. Therefore, flicker-free low ripple LED current is achieved. With a small dc link voltage ripple of prestage, the turn-on time of the active switch is almost constant in a half-line cycle. Therefore, PFC can be achieved with inductor current of prestage operating in a discontinuous conduction mode. With small input capacitance, the proposed LED driver presents a good compatibility performance with different kinds of electronic transformers. Furthermore, the proposed LED driver needs only one active switch and one control loop, which makes circuit volume small and low cost. Finally, a 4 W LED driver for a small-size MR16 lighting system is provided to verify the studied results.