Generation of Highly Accurate DEMs Over Flat Areas by Means of Dual-Frequency and Dual-Baseline Airborne SAR Interferometry

In this paper, a dual-frequency and dual-baseline (DFDB) processing framework for the extraction of high-precision terrain information from airborne interferometric synthetic aperture radar (SAR) data is presented. Specifically, we propose the use of two single-pass data sets acquired simultaneously in two different frequency bands and two large-baseline repeat-pass data sets also acquired simultaneously in two frequency bands. The configuration profits from the stability of the single-pass derived elevation maps in relation to spatially correlated artifacts as well as from the increased sensitivity associated with large-baseline acquisitions. Moreover, the dual-frequency nature of the data set enables the tackling of the phase unwrapping issue, promoting the retrieval of unambiguous measurements. Several algorithms for the interferometric processing of the DFDB airborne data set are proposed, including the outline of multichannel phase calibration and unwrapping error correction strategies and approaches to remove spatially correlated artifacts and extract the common underlying topography. Elevation models generated from a DFDB data set acquired with the airborne F-SAR sensor over tidal flats in northern Germany are presented, and comparisons with an airborne laser scanner reference show errors with a standard deviation of around 14 cm and a mean absolute deviation of less than 10 cm.