Design and development of automotive IVN concept proto model for vehicle parameter monitoring and control

In vehicle networking is a communication between the nodes that is ECU's (Electronic control unit) and the well-known protocol used across the automotive industry which is basically designed by Robert Bosch is CAN (controller area network). The project aim is to implement CAN using two controllers (PIC controller mounted PCB boards). Here in hardware just for understanding purpose generic switch inputs and sensors are considered as vehicle parameters, in real time it can be any signal like Ambient temp sensor, Proximity sensor and output we can see as LED will glow upon receiving the input. Code for the message Transmit and receive is written in Embedded Schematics design, PCB layout preparation done using Proteus tool. Hardware in assembled on PCB boards and software flashed in the PIC controller using PIK KIT tool. Message packaging with respective ECU signals for every ECU on CAN bus done in db+ editor tool. Ones DBC (Data base collection) will get prepared for desired function same will be flashed in to the ECU.IVN (In vehicle network) is all together a very extensive subject in automotive industry and this paper is the resemblance of the network in proto format.