Enhanced-Selectivity High-Linearity Low-Noise Mixer-First Receiver With Complex Pole Pair Due to Capacitive Positive Feedback

A mixer-first receiver (RX) with enhanced selectivity and high dynamic range is proposed, targeting to remove surface acoustic-wave-filters in mobile phones and cover all frequency bands up to 6 GHz. Capacitive negative feedback across the baseband (BB) amplifier serves as a blocker bypassing path, while an extra capacitive positive feedback path offers further blocker rejection. This combination of feedback paths synthesizes a complex pole pair at the input of the BB amplifier, which is upconverted to the RF port to obtain steeper RF bandpass filter roll-off and reduced distortion. This paper explains the circuit principle and analyzes RX performance. A prototype chip fabricated in 45-nm partially depleted silicon on insulator (SOI) technology achieves high out-of-band linearity (input-referred third-order intercept point (IIP3) = 39 dBm and input-referred second-order intercept point (IIP2) = 88 dB) combined with sub-3-dB noise figure. Desensitization due to a 0-dBm blocker is only 2.2 dB at 1.4 GHz.