Modeling and Simulation of Railgun System Driven by Multiple HTSPPT Modules

In the rail-type electromagnetic launching system, the equivalent load of pulsed-power supplies (PSs) varies with the launching process, while it has a certain influence on the discharge of pulsed PS. However, in the analysis and design of pulsed PS, researchers usually use the fixed resistance and inductance to simulate the load, which is impossible to accurately study the characteristics of the pulsed PS. The electromagnetic launching needs high-amplitude current pulse. Therefore, in this paper, a mathematical model of electromagnetic launching system driven by multiple superconducting inductive pulsed PS modules is established. In this model, the fixed resistance and inductance load are replaced by the dynamic load model of the railgun; the effects of dynamic load and fixed load on the discharge characteristics are analyzed; the parallel discharge characteristics of multiple high-temperature superconducting pulsed-power transformer (HTSPPT) modules are studied; and the characteristics of the simple rail-type electromagnetic launching driven by multiple HTSPPT modules are analyzed. The simulation results show that a high amplitude of current pulse can be produced using synchronous parallel discharge of multiple HTSPPT modules. The simulation results show that when the resistance and inductance of load are fixed at 2 mQ and 0.5 μH, respectively, the current amplification factor is 15.666, and the maximum voltage of the auxiliary capacitor is 1079 V. In the dynamic load model, the current amplification factor is 17.174, and the error is 9.6%. The maximum voltage of the auxiliary capacitor is 983 V, and the error is 8.9%. Therefore, the discharge characteristics of pulsed PS can be more accurately studied using dynamic models.