A Three-Electrode Gas Switch Triggered by Microhollow Cathode Discharge With Low Trigger Voltage

The trigger voltage is usually high in traditional three-electrode gas switch, which makes the trigger system large and complex in large-scale pulsed power system such as linear transformer driver. In this paper, a three-electrode gas switch triggered by microhollow cathode (MHC) discharge is put forward, which can be operated stably under low trigger voltage. MHC discharge is a kind of microplasma with the characteristics of low trigger voltage (several thousand volts), high electron density, and high gas pressure discharge. In this switch, three MHC triggers sharing the same cathode are designed as the third electrode of the switch in the middle. Positive and negative high voltages are applied to two main electrodes, respectively. The breakdown characteristics of MHC discharge triggered by pulse voltage are first studied. The trigger voltage can be as low as 8 kV at 0.3 MPa in pure N2 with the discharge peak current up to 80 A. A circuit simulation model describing breakdown process of MHC is also built. Then two operating modes of the switch, three-electrode mode (T-mode) and two-electrode mode (D-mode), are analyzed. The stable operation with the charging voltage from ±35 to ±50 kV is realized under different working coefficients from 64% to 92% and different trigger voltages from 8 to 15 kV. The turn-on parameters including delay time, jitter, and turn-on time are studied that the delay time and jitter of D-mode are longer than that of T-mode under the same condition. At last, the improvement of MHC trigger for the stable operation of D-mode with shorter delay time is described.