A 2.24-mW, 61.8-dB SNDR, 20-MS/s Pipelined ADC With Charge-Pump-Based Dynamic Biasing for Power Reduction in Op Amp Sharing

A high-speed dynamic biasing technique is presented for reducing op amp power in discrete-time, multistage, analog circuits employing op amp sharing. To exploit typical power scaling in such circuits, a charge pump, of which the on-times of up and down currents are controlled by two comparators, performs rapid change of the op amp bias condition between a low-current mode and a high-current mode during nonoverlapping clock periods of the two phase clocks. The errors caused by finite comparator delay are compensated for by embedding intentional offset voltages in the comparators, which are implemented by using asymmetric differential input pairs in the comparators. To verify the efficacy of the proposed biasing technique, an 11-b pipelined analog-to-digital converter (ADC) has been implemented using 0.15-μm devices in a 28-nm CMOS technology. With a 20-MHz sampling clock, the ADC achieves a 61.8-dB SNDR while consuming a 2.24-mW power from a 1.8-V supply. The MDAC and ADC power are reduced by about 45% and 30%, respectively, compared with a conventional pipelined ADC employing an op amp in each MDAC. Owing to the simple structure of the proposed dynamic biasing, the prototype ADC occupies only 0.052 mm
²
.