Excitation control of a synchronous generator using a lookup table

A scheme involving the use of a lookup table is developed for the excitation control of a synchronous generator. The proposed control scheme, generator speed deviation, and acceleration deviation are taken as the input signals. These input signals are sampled and converted to linguistic terms before they are fed into the controller. The controller generates the desired output (control) signal by using a set of production rules (if-then rules) that are based on previous experience to relate the input signals to the output. The output signal is converted from linguistic terms to a numerical value before it is sent to the excitation system of the synchronous machine. To demonstrate the effectiveness of the proposed control scheme, digital simulations of a synchronous generator subject to a three-phase fault under different operating conditions were performed. It was found that the controller can improve the dynamic performance of a synchronous generator over a wide range of operating conditions. Since the controller does not require model identification, it is computationally efficient and is suitable for online excitation control, using a microcomputer.<
>