A very compact 1MS/s Nyquist-rate A/D-converter with 12 effective bits

We present a very compact analog-to-digital convertor (ADC) for use as a standard cell. To achieve an inherent accuracy of at least 12-bits without trimming or calibration, extended counting A/D-conversion is used. Here, the circuit performs a conversion by passing through two modes of operation: first it works as a 1st-order incremental convertor and then it is reconfigured to operate as a conventional algorithmic converter. This way, we obtain a Nyquist-rate converter that requires only 1 operational amplifier and achieves 12-bit accuracy performance in 13 clock cycles with 9 bit capacitor matching. The circuit is designed in 0.18 μm CMOS with a thick oxide option. The resulting analog core occupies a chip area of only 0.011 mm
²
and the complete digital control and reconstruction logic (including additional test features and storage registers) is 0.02 mm
²
. The analog blocks of the circuit consume 1.2mW and the digital 0.4mW. At a sample rate of 1 MS/s, the peak SNDR is 74.5dB and the dynamic range is 78dB, constant over the Nyquist band. The worst-case integral non-lineairity (INL) is within ±0.55 LSB.