Multisecondary Transformer: A Modeling Technique for Simulation

Pulse step modulation (PSM)-based high-voltage power supplies have played a significant role in fusion research. In many cases, multisecondary transformers are used for generation of tens of kilovolt range outputs with fast (microsecond-order) transient response. In this scheme, large numbers of isolated voltage sources are connected in series to generate the output. Isolated voltage sources can be achieved by a large number of separate transformers or by a single unit of multisecondary transformer. Naturally, a transformer having numbers of secondary windings (
$\sim$
40) on a single core is the preferred solution for PSM topology due to its space and cost consideration. For design and simulation analysis of such a power supply, the model of a multisecondary transformer poses special problem to any circuit analysis software. While many simulation software packages provide transformer models with limited number (3–6) of secondary windings, they still fail to predict the actual observed results from a manufactured unit. This paper discusses the difficulties in modeling, step by step with representative schemes of multisecondary transformer, and advantages/disadvantages of each scheme with simulation results. Finally, a model using flux-coupled cores as basic building blocks is proposed; this model is able to simulate actual transformers very close to its observed parameters in test and actual usage.