Design of a 2.4 GHz interrogator for a rectenna-based sensor system

This paper presents a design for an interrogator for a new class of passive wireless sensors. The sensors are intended for deeply embedded structural health monitoring applications. As such, the interrogator must both transmit a signal to elicit a response from the sensor and be able to monitor that response. The interrogator considered transmits in the 2.40-2.48 GHz ISM band and monitors the 2
^nd
harmonic response created by the sensor. The interrogator employs two fractional-N PLLs, one for frequency synthesis of the interrogating signal and one for a reference at a fixed frequency offset. The received signal lies in the 4.80-4.96 GHz band and is downconverted to a constant frequency (70 MHz). The output frequency of the two PLLs is controlled by a single FPGA. The interrogator is designed to either sweep across the transmit band or to transmit at a fixed frequency within the band depending on whether the sensed parameter is static or dynamic, respectively, in nature.