A low-distortion BiCMOS seventh-order Bessel filter operating at 2.5 V supply

This paper presents the design of a seventh-order continuous-time Bessel filter using a new low-voltage and highly linear BiCMOS transconductor. A high-gain and parasitic-insensitive integrator is obtained by using an active capacitor scheme. The filter has been designed to operate at a 2.5 V supply with a nominal -3 dB cutoff frequency of 600 kHz. It has been fabricated in 1 /spl mu/m, double-poly 6-GHz BiCMOS process. The inband group delay variation is less than 10 ns. The total harmonic distortion (THD) measured with a 100 kHz input signal is less than -49 dB for a 2 V/sub pp/ amplitude and the dynamic range is 77 dB. The filter can be frequency tuned over almost one decade with a gain variation less than 0.2 dB in the passband. A common-mode rejection ratio (CMRR) of 53 dB in the passband is observed, thanks to a careful common-mode control strategy.