A 5-Gb/s CDR Circuit With Automatically Calibrated Linear Phase Detector

This paper presents a 5-Gb/s clock and data recovery (CDR) circuit which implements a calibration circuit to correct static phase offsets in a linear phase detector. Static phase offsets directly reduce the performance of CDR circuits as the incoming data is not sampled at the center of the eye. Process nonidealities can cause static phase offsets in linear phase detectors by adversely affecting the circuits in a way which is difficult to design for, making calibration an attractive solution. Both the calibration algorithm and test chip implementation are described and measured results are presented. The CDR circuit was fabricated in a 0.18-mum, six metal layer standard CMOS process. With a pseudorandom bit sequence of 2
⁷
- 1 calibration improved the measured bit error rate from 4.6 x 10
^-2
to less than 10
^-13
.