Optimized routing for fault management in optical burst-switched WDM networks

Optical burst switching (OBS) is a promising technique for supporting high-capacity, bursty data traffic over optical wavelength-division-multiplexed (WDM) networks. An optical link failure may result in a huge amount of data (and revenue) loss, and it has been an important survivability concern in optical networks. In this paper, we study the fault- management issues related with a link failure in an OBS network. We propose to use pre-planned global rerouting to balance network load and to reroute bursts after a link fails. We apply optimization techniques to pre-plan explicit backup routes for failure scenarios. Our objective is to achieve optimal load balancing both before and after a failure such that the network state can still remain stable with minimum burst-loss probability when a failure occurs. We apply the pre-planned normal and backup routing tables to an OBS network, and study the network performance after a failure occur using illustrative numerical examples. The results show that the average burst-loss probability can be significantly reduced by 60% - from an average of 0.10 to 0.04 (when the normalized link load is less than 0.5) using globally-rerouted backup routes, when compared with the scheme without global rerouting. We also observe that the burst-loss probability is reduced by 43% - from an average of 0.07 to 0.04 (when the link load is less than 0.5) if the rerouting is done using optimization techniques, when compared with shortest-path routing.for Fault Management