ATS-6 Interferometer

The Applications Technology Satellite-6 (ATS-6) RF interferometer is utilized primarily as a precision 3-axis attitude sensor having an unambiguous field of view of 350°. This function requires two separated ground transmitters, each using one of the two available frequency channels or sharing a single channel by time multiplexing. For 3-axis control, one uplink transmitter can provide 2-axis attitude (pitch and roll) with other sensors (e.g., a Polaris tracker) providing yaw attitude. By utilizing two uplink transmitters and the Earth sensor or three time multiplexed uplink transmitters, the interferometer can also provide measurements of ATS-6 spacecraft orbit position. Uplink frequencies are 6.150 and 6.155 GHz. The receiving antennas are spaced at 19.95 wavelengths (λ) for the vernier baseline and 1.66 λ for the coarse baseline. Spacecraft system weight is 8.39 kg (18.5 lb) and power requirement is 15.5 W. Flight evaluation results are given for the interferometer including R F link budgets, modulation of uplink carrier, signal-to-noise ratio, and dropout behavior. A hardware calibration model is described, containing major biases in the phase measurements. Techniques for flight calibration as both an attitude and spacecraft position sensor are outlined . Flight testing has shown that on-line calibration of receiver/converter biases must be performed on a short term routine basis. Interferometer resolution was found to be 0.00140 space angle with negligible noise (jitter) at transmitted power levels above 72 dBW. As an attitude sensor, the interferometer has demonstrated the ability to provide stabilization to better than 0.